Most common failures | No# failures |
---|
Headlamp aim out of alignment | 50 |
Registration plate issues | 29 |
Rear reflector on motorcycle missing |1.4.1| | 27 |
Horn not working |1.7.3a| | 17 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 10 |
Riders seat insecure |6.2.1a| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Rear Wheel spoke excessively loose |4.2.1b| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Nearside Rear Direction indicator not working |1.5.1c| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Riders seat insecure |6.2.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Horn not working (7.7 (a)) | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear reflector missing |1.5.1a| | 1 |
Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Offside Rear Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Front Steering component deformed and unserviceable |2.2.C.1d| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn missing |1.7.1| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front An item not tested |Manual| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Throttle operating incorrectly Sticking On |6.2.1f| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Footrest missing |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Central Rear Lower Wheel spoke excessively loose |4.2.1b| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Lower Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp aim beam image too far to the left |1.6.4| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Direction indicators not working R/H |1.5.1c| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swinging arm severely holed and corroed |6.1.1 |c| |i|| | 1 |
Indicator switch defective |1.5.4| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Wheel spoke excessively loose multiple spokes loose |5.2.2 |d|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Wheel alignment incorrect which adversely affects the steering FRONT FORKS, HANDLE BARS, HEADLIGHT OUT OF LINE |2.5.1| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Rear Lower Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected When Going To Full Lock On Off Side.
The Motorcycle Engine Revs Up. |6.2.7 |a| |ii|| | 1 |
Nearside Rear Wheel spoke cracked |5.2.2 |d|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Central Rear Upper Stop lamp remains on when the brake is released loose connection |1.3.1e| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Brake clevis joint insecure |1.1.15 |c|| | 1 |
Rear wheel spindle securing nut locking device missing split pin missing |2.4.A.2b| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Centre Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Front Upper Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Central Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Steering column top bearing excessively worn (2.2.2 (b)) | 1 |
Front Exhaust system insecure (6.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure Brake disc locking tabs not fitted correctly (6.1.1 (b) (i)) | 1 |
All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Shock absorber has a serious fluid leak both front forks (5.3.2 (b)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake component insecure Brake torque arm split pin missing (1.1.21 (c)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |