| Most common failures | No# failures |
|---|
| Headlamp aim beam image kick up to the offside |1.6| | 31 |
| Headlamp aim out of alignment | 20 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 15 |
| Drive chain excessively loose |6.2.1d| | 13 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Registration plate issues | 8 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Exhaust excessively deteriorated |7.1.1a| | 6 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 5 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Horn not working |1.7.3a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Registration plate lamp issues | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Throttle operating incorrectly engine revving to high |6.2.1f| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Wheel spoke excessively loose All spokes are loose N/S and O/S. |4.2.1b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front shock absorber seal failed and leaking oil offside |2.3.3| | 1 |
| Roller brake test indicates a sticking brake rear |3.3.A1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Centre Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear All position lamps not working (4.2.1 (a)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Nearside Front Brake component insecure NSF brake hose insecure (1.1.21 (c)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
| Stop lamp not working From front lever (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |