Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Headlamp aim beam image kick up to the offside |1.6| | 16 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
Registration plate issues | 10 |
Drive chain excessively loose |6.2.1d| | 9 |
Drive chain worn to excess |6.2.1e| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Horn not working |1.7.3a| | 5 |
Front Headlamp aim beam image kick up to the offside |1.6| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Handlebar deformed |2.1.1b| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Fuel hose leaking |7.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Central Front Horn not working |7.7 |a| |ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake hose damaged | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Brake reaction bracket securing bolt|s| missing split pins missing |3.2.A1j| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake pipe union leaking fluid front caliper banjo leaking |3.2.B4| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake reaction bracket securing bolt|s| missing split pin missing |3.2.A1j| | 1 |
Nearside Rear Wheel spoke cracked. 5 spokes snapped |4.2.1b| | 1 |
Rear Wheel spoke excessively loose all rear wheel spokes loose |4.2.1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Lower Brake pipe inadequately supported |3.2.B2b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Central Front Lower Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Central Rear Upper Stop lamp affected by the operation of another lamp side lamp and stoplamp wires are connected the wrong way round |1.3.2| | 1 |
Central Rear Upper Rear reflector on motorcycle damaged and function impaired rear lamp lens has a piece brocken out of it and shows a white light to the rear |1.4.2a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
Rear Roller brake test indicates a sticking brake Cam seized in backplate. |3.3.A1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock RH lock |2.1.4| | 1 |
Exhaust mounting missing Heat shield insecure. |7.1.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake lever cracked |3.1.2c| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Dipswitch does not operate immediately when selected on main beam tell tale not working |4.1.3 |b|| | 1 |
Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock and revs engine |2.1.4 |a|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned Rear turn signals are built into the rear light unit (4.4.3 (a)) | 1 |
Throttle operating incorrectly Throttle housing is insecure and could foul on the front brake lever. (6.2.7 (a) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Front Headlamp light source and lamp not compatible DIPs wrong way (4.1.4 (c)) | 1 |
Nearside Direction indicator likely to become detached loose on mudguard (4.4.1 (c) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |