| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Registration plate issues | 16 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Registration plate lamp issues | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |1.1.6 |d|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Rear Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Steering column flexible coupling has excessive play |2.1.5| | 1 |
| Brake cable locking device missing |3.5.1l| | 1 |
| Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Centre Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Hazard warning switch missing |1.4.B.1d| | 1 |
| Offside Front Footrest insecure |9.6.1| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Rear Upper Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Inner Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake back plate insecure rear brake torque arm locking device missing |1.1.14 |d|| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Direction indicators not working |1.4.A.2c| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Front Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Rear Stop lamp not working rear brake |1.2.1b| | 1 |
| Offside Rear Stop lamp not working rear brake |1.2.1b| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting weld cracked mud guard bracket |2.4.G.1| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting fractured mud guard |2.4.G.1| | 1 |
| Offside Front Brake locking device missing |3.2.A1e| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Brake lever cracked |3.1.2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake performance not tested |3.3| | 1 |
| An item not tested |Manual| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak fork |5.3.2 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Steering headbearing has excessive wear or free play Notch in Centre |2.2.2 |f| |i|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Brake component insecure Rear break mount locking devices missing (1.1.21 (c)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Valve stem seriously damaged both rears (5.2.3 (j)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle lifting on right hand lock (6.2.7 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Upper Sidecar structure joining/attachment plate or fastening insecure Large locknut on motorcycle side mount loose (6.1.1 (b) (i)) | 1 |
| Nearside Front Lower Sidecar structure joining/attachment plate or fastening insecure Pinchbolt on chair mount slightly loose (6.1.1 (b) (i)) | 1 |
| Stop lamp(s) not working rear brake (4.3.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |