| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Registration plate issues | 17 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front shock absorber seal failed and leaking oil x2 |2.3.3| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Centre Rear Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Outer Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Handlebar handgrip not secure to handlebars. hand guards |2.1.1c| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Stop lamp not working Rear switch needed cleaning. |4.3.1 |a| |ii|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front shock absorber seal failed and leaking oil L/h fork seal leaking |2.3.3| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Horn not loud enough to be heard by another road user quieter than exhausts,button does not function every time. |1.7.3a| | 1 |
| Stop lamp remains on when the brake is released due to front brake lever operation,lever not returning fully |1.3.1e| | 1 |
| Stop lamp deteriorated and function impaired stop light appears to be too dull, and when tail light is repaired,may be duller than tail light |1.3.3a| | 1 |
| Direction indicator flashing more than 120 times per minute all four indicators flash too fast |1.5.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Upper Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Footrest insecure (6.2.12 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Throttle operating incorrectly throttle sticking (6.2.7 (a) (i)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear swing arm (6.1.1 (c) (i)) | 1 |
| Shock absorber has a serious fluid leak both forks legs leaking (5.3.2 (b)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Front Shock absorber has a serious fluid leak Fork oil seal failed (5.3.2 (b)) | 1 |
| Rear Lower Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Suspension arm modified so the suspension is likely to foul other components (5.3.3 (c) (ii)) | 1 |
| Nearside Front Upper Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |