Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Registration plate issues | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Horn not working |1.7.3a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Centre Headlamp incorrect colour |1.2.1| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Outer Direction indicators not working all 4 not working |1.5.1c| | 1 |
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Horn not working |1.7.3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Brake component insecure Split pin missing |1.1.21 |c|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Rear Hydraulic brake cylinder insecurely mounted |3.6.A.2a| | 1 |
Parking brake efficiency below requirements |3.7.B.7| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |9.2.2a| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Indicator switch defective sticking intermittently. |1.5.4| | 1 |
Brake lever cannot be applied smoothly Pivot seized |3.1.3d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Offside Front Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak Fork seals leaking (5.3.2 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected fitted new spring to inside of brake lever assy. (1.1.2 (b) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Brake grabbing severely front brake is snatching (grabbing) severely (1.2.1 (c)) | 1 |