Most common failures | No# failures |
---|
Headlamp aim out of alignment | 37 |
Registration plate lamp issues | 14 |
Registration plate issues | 11 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 7 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Headlamp aim not tested (4.1.2 (b)) | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear reflector on motorcycle obscured |1.4.2b| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 2 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Inner Exhaust system insecure mid braket |6.1.2 |a|| | 1 |
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component leaking carburettor |7.2.1a| | 1 |
Offside Rear Footrest missing Siezed |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear reflector on sidecar obscured |1.4.2b| | 1 |
Stop lamp not working From front brake switch |4.3.1 |a| |ii|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Wheel spoke excessively loose front wheel spoke retighten |4.2.1b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Stop lamp not working front brake light switch not working |4.3.1 |a| |ii|| | 1 |
Position lamp switch insecure both |1.1.4b| | 1 |
Horn not working |1.7.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicator incorrect colour all |1.5.1b| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Brake lever is positioned so that the brake cannot be readily applied Lever fouling on Throttle body - adjust mounts |3.1.3c| | 1 |
Rear reflector on motorcycle missing Fit reflector |1.4.1| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Rear Footrest missing both |6.2.12 |a|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies operating spring reconected |1.3.1a| | 1 |
Nearside Front Brake caliper|s| insecure CALIPER IS POSITIONED INCORRECTLY AND RUBBING DISC |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Stop lamp not working rear brake |4.3.1 |a| |ii|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Central Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Central Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Nearside Rear Direction indicators not working |Burnt by Exhaust| |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Brake lever has restricted free movement lever broken (1.1.15 (e)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Stop lamp not working front brake switch not working. (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Rear Brake component insecure r/ clip missing from brake pin (1.1.21 (c)) | 1 |
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Handlebar mounting insecure handlebar risers loose (2.2.1 (a) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Central Front Headlamp insecure (4.1.1 (c)) | 1 |
Central Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Offside Footrest missing pillion footrest broken (6.2.12 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Horn sound not in accordance with requirements It must not be:
gong
bell
siren
more than one tone
Motorcycles first used on or after 1 August 1973 must emit a continuous or uniform sound that is not harsh or grating. (7.7 (c)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Front Headlamp aim not tested insecure (4.1.2 (b)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
Rear Wheel spoke missing broken (5.2.2 (d)) | 1 |
Rear Brake performance not tested (1.2.1 (g)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |