Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Registration plate issues | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Brake hose excessively deteriorated | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Brake hose leaking fluid |3.2.B4| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Inner Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Inner Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Inner Rear Lower Stop lamp damaged and function impaired |1.3.3a| | 1 |
Inner Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Horn missing |1.7.1| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Inner Brake caliper leaking |1.1.16 |b| |i|| | 1 |
Nearside Rear Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
Rear All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Position lamp lens seriously defective |4.2.1 |b|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
Headlamp light intensity severely reduced high beam |4.1.4 |a|| | 1 |
Nearside Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Brake locking device missing reaction bar locking device |3.2.A1e| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Handlebar excessively corroded |2.1.1b| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Front Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Brake rod excessively chafed |3.2.A1a| | 1 |
Vehicle identification number not legible |0.2 |b|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Brake rod excessively damaged |3.2.A1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake locking device missing forward mount of rear torque |3.2.A1e| | 1 |
Rear Brake locking device insecure pad locater screw |3.2.A1e| | 1 |
All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Headlamp incorrect colour (4.1.4 (a)) | 1 |