Most common failures | No# failures |
---|
Headlamp aim out of alignment | 74 |
Registration plate issues | 31 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Front Position lamp not working (4.2.1 (a)) | 5 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Fuel system component leaking no 4 carburetta |7.2.1a| | 1 |
Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Front All position lamps not working |4.2.1 |a|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Brake performance not tested due to front brakes binding |1.2.1 |g|| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Handlebar handgrip not secure to handlebars. r/h twist grip |2.1.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies hand brack lever |1.3.1a| | 1 |
Indicator switch defective hazard switch |1.5.4| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Exhaust mounting does not fully support the exhaust system Exhaust silencer mounting is loose hitting swinging arm |7.1.1.c| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system Exhaust silencer is loose |7.1.1.c| | 1 |
Offside Footrest insecure Rh riders footrest loose |6.2.1a| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls RH bar hits tank |2.1.2b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Horn missing |1.7.1| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Front Brake lever so insecure that the brake cannot be readily applied missing (1.1.2 (e) (ii)) | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Headlamp missing (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
Nearside Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Front Inner Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Stop lamp not working Rear brake application. (4.3.1 (a) (ii)) | 1 |
Front Handlebar retaining device missing both sides (2.2.1 (b) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Headlamp not working on dipped beam headlamp inop on dip beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Central Rear Sidecar structure has a fracture which is likely to adversely affect braking or steering support bar broken off (6.1.1 (a) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Does not illuminate when front brake is applied (4.3.2 (a) (iii)) | 1 |
Brake servo defective or ineffective leaking from clutch servo (1.1.10 (a) (i)) | 1 |