| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 63 |
| Rear reflector on motorcycle missing |1.4.1| | 34 |
| Registration plate issues | 25 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Headlamp aim beam image kick up to the offside |1.6| | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Horn not working |1.7.3a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Front Brake excessively binding |1.2.1 |f|| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Brake hose excessively deteriorated | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| An item not tested |Manual| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Front Fork yoke insecure bolt broken off in bottom yoke |2.2.2 |d| |i|| | 1 |
| Front Lower Fork yoke modification unsafe |2.2.2 |e|| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Nearside Front Brake component leaking fluid |3.2.B4| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded front brake binding |3.2.A1h| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake component insecure pad retaining pin missing |1.1.21 |c|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Centre All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Rear Upper Rear suspension bush has excessive free play shock bush |2.4.A2a|i|| | 1 |
| Offside Rear Upper Rear suspension bush has excessive free play shock bush |2.4.A2a|i|| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
| Stop lamp not working from rear control |4.3.1 |a| |ii|| | 1 |
| Central Lower Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies foot |1.3.1a| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Throttle operating incorrectly on full lock |6.2.1f| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride pillion handles loose |6.2.1h| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Front Brake indicates excessive fluctuation of brake effort 40% |1.2.1 |e|| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Headlamp not working on dipped beam wired up wrong (4.1.1 (a) (ii)) | 1 |
| Suspension arm attachment bracket/mounting insecure swingarm pivot bolt fitted incorrectly (5.3.3 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Upper Fork yoke insecure Nut lose. (2.2.2 (d) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak leaking oil excessively (5.3.2 (b)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Offside Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake excessively binding front Brake Binding excessively (1.2.1 (f)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls rear brake switch not functioning correctly (4.3.2 (a) (iii)) | 1 |
| Wheel bearing rough when rotated front (5.1.3 (b) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Brake disc significantly and obviously worn disc out of shape (1.1.14 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Clutch lever positioned so it cannot be readily operated (6.2.7 (b)) | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Nearside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Front Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Drive belt excessively tight (6.1.7 (k) (i)) | 1 |
| Offside Front Brake caliper leaking leaking onto disc (1.1.16 (b) (i)) | 1 |
| Nearside Front Handlebar retaining device loose clamp (2.2.1 (b) (i)) | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp affected by offside indicator (4.4.3 (b)) | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |