Most common failures | No# failures |
---|
Headlamp aim out of alignment | 42 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 23 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 15 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Horn not working |1.7.3a| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Registration plate issues | 3 |
Headlamp incorrect colour |1.2.1| | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Motorcycle structure cracked |6.1.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Position lamp not working Front |4.2.1 |a|| | 1 |
Exhaust is leaking and excessively noisey collector box |7.1.1b| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension bearing has excessive free play swing arm bearings have side to side movement |2.4.A2a|i|| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Lower Brake locking device insecure |3.2.A1e| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Central Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Fuel pipe union leaking |7.2.3| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Front position lamp|s| missing |1.1.A.3a| | 1 |
Rear position lamp|s| missing |1.1.A.3a| | 1 |
Rear reflector missing Both |1.5.1a| | 1 |
Stop lamp missing Both |1.2.1a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Brake hose excessively deteriorated | 1 |
Indicator switch insecure |1.5.4| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake pipe union leaking fluid rear fitting on rear caliper loose and leaking |3.2.B4| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Rear Indicator tell tale not functioning |1.5.2| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Stop lamp not working Brake light switch |4.3.1 |a| |ii|| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake locking device missing reaction bracket |3.2.A1e| | 1 |
Centre Front Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Nearside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Suspension component mounting modified so the suspension is inoperative Suspension seized no movement up or down! |5.3.3 |c| |ii|| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front suspension assembly component excessively corroded. STANTION |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. STANTION |2.3.1| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle sticking on when handle bars on right full lock (6.2.7 (a) (ii)) | 1 |
Rear Stop lamp not working Rear brake (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Brake disc contaminated fork oil (1.1.14 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |