Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 24 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 17 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Registration plate issues | 8 |
Horn not working |1.7.3a| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Brake hose damaged | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear parking brake recording little or no effort | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Valve stem seriously damaged |5.2.3 |j|| | 1 |
Brake locking device insecure front nearside caliper pin loose |3.2.A1e| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Motorcycle structure cracked mainstand |6.1.1a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake master cylinder defective but brake still operating |1.1.10 |b| |i|| | 1 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Position lamp switch faulty |1.1.4a| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Lower Rear suspension bush has excessive free play Linkage |2.4.A2a|i|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Upper Direction indicator not working |1.5.1c| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Wheel bearing rough when rotated both front bearings replaced |5.1.3 |b| |i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Lower Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Centre Front Upper Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |9.2.1a| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Brake hose has insufficient room to move | 1 |
Nearside Rear Rear reflector missing |1.5.1a| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Nearside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Offside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Offside Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Brakes imbalanced across an axle | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Lower Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front Front position lamp|s| missing |1.1.A.3a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Brake component is excessively corroded |3.1.5| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Front Hydraulic brake control feels spongy (3.1.4a) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Offside Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seals leaking (5.3.2 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Parking brake lever inoperative (1.1.6 (d)) | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake disc fractured Cracked (1.1.14 (a) (ii)) | 1 |
Front Brake rod insecure Split pins missing/nut loose (1.1.15 (c)) | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition Blowing from collector (8.1.1 (a)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |