| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 25 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Registration plate issues | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Front Brake lever has restricted free movement |1.1.15 |e|| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Fuel tank leaking |7.2.1a| | 2 |
| Brake hose damaged | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Headlamp aim beam image kick up to the offside masked |1.6| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
| Front Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Lower Fuel tank leaking |7.2.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Front Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Offside Rear Upper Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Rear Stop lamp not working on footbrake |1.2.1b| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Hydraulic brake cylinder damaged and function impaired footbrake m/cylinder seized |3.6.A.2c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Brake pipe excessively chafed |3.2.B2a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Brake locking device missing Brake ankor bolt split pin missing! |3.2.A1e| | 1 |
| Front position lamp damaged and function impaired main beam illuminates when steering moved from lock to lock |1.1.1b| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Steering headbearing has excessive free play |9.2.4| | 1 |
| Rear position lamp|s| has less than 50% of the light sources illuminating flickers on and off |1.1.A.3b| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Upper Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking on full lock (6.2.7 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Nearside Front Lower Brake excessively binding (1.2.1 (f)) | 1 |
| Central Front Upper Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Suspension component damaged and seriously weakened Swingarm bearings (5.3.3 (b) (i)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Throttle operating incorrectly very slow to close (6.2.7 (a) (i)) | 1 |
| Front Brake excessively binding very slow to release (1.2.1 (f)) | 1 |
| Offside Front Footrest insecure pin clip missing (6.2.12 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |