Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Registration plate issues | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Horn not working |1.7.3a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Horn sounds harsh or grating |1.7.3c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Brakes imbalanced across an axle | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Upper Horn control defective |1.7.2a| | 1 |
Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Exhaust has part of the system missing baffles |7.1.1a| | 1 |
Nearside Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Brake locking device missing rear torque arm |3.2.A1e| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear An item not tested |Manual| | 1 |
Nearside Position lamp missing |4.2.1 |a|| | 1 |
Offside Position lamp missing |4.2.1 |a|| | 1 |
Steering lock stop missing |2.1.4 |b|| | 1 |
Offside Rear Brake drum contaminated leaking |1.1.14 |b|| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Direction indicator does not face the front |4.4.3 |a|| | 1 |
Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Fork yoke fractured lock stop |2.2.2 |f| |i|| | 1 |
Nearside Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
Front Position lamp missing s |4.2.1 |a|| | 1 |
Offside Front Stop lamp not working |1.2.1b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Front Driver`s seat insecure |6.2.A.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear wheel spindle |6.2.1h| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
Rear Brake drum|s| cracked |3.2.A1g| | 1 |
Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Inner Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Outer Rear Lower Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Rear Motorcycle structure cracked |6.1.1a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Lower Brake excessively binding Front Brakes Have excessive Bind (1.2.1 (f)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak left hand fork seal blown (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake component insecure reaction arm bolt loose (1.1.21 (c)) | 1 |