| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 146 |
| Rear reflector on motorcycle missing |1.4.1| | 62 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 51 |
| Steering headbearing has excessive free play |2.2.2| | 35 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 35 |
| Drive chain excessively loose |6.2.1d| | 34 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 34 |
| Horn not working |1.7.3a| | 31 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 31 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 30 |
| Front wheel bearings have excessive free play |2.3.5b| | 29 |
| Registration plate issues | 25 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 24 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 24 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 23 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 21 |
| Front wheel bearings are excessively rough |2.3.5b| | 20 |
| Drive chain worn to excess |6.2.1e| | 20 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 17 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 16 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 15 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 14 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 14 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 14 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 13 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 12 |
| Front Steering headbearing has excessive free play |2.2.2| | 11 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Drive chain excessively tight |6.2.1d| | 10 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 9 |
| Throttle operating incorrectly |6.2.1f| | 9 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 9 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 8 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 8 |
| Headlamp aim beam image kick up to the offside |1.6| | 7 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
| Stop lamp remains on when the brakes are released | 7 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Stop lamp remains on when the brake is released |1.3.1e| | 7 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 7 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
| Offside Front Direction indicator not working |1.5.1c| | 6 |
| Headlamp insecure |1.2.3b| | 6 |
| Rear Brake disc|s| cracked |3.2.A1g| | 6 |
| Nearside Front Direction indicator not working |1.5.1c| | 6 |
| Front Brake excessively binding (1.2.1 (f)) | 6 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 5 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Exhaust excessively deteriorated |7.1.1a| | 5 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 5 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Nearside Front Direction indicators not working |1.5.1c| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Offside Front Direction indicator insecure |1.5.3b| | 4 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 4 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 4 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 4 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Drive chain excessively tight |6.2.1d| | 3 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 3 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Offside Direction indicator not working |1.5.1c| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Front Brake hose leaking fluid |3.2.B4| | 3 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 3 |
| Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |