Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 26 |
Headlamp aim out of alignment | 20 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Registration plate issues | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Horn not working |1.7.3a| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear Brake component is excessively corroded |3.1.5| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
An item not tested |Manual| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Throttle operating incorrectly stiff and not returning |6.2.1f| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Chain guard fouling another component |6.2.1c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Shock absorber likely to become detached |5.3.2 |a| |ii|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Brake caliper|s| insecure both front |3.2.A1j| | 1 |
Nearside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Footrest missing |6.2.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride barend |6.2.1h| | 1 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride barend
|6.2.1h| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride switch gear pin broken |6.2.1h| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Offside Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Motorcycle structure adversely modified Rear shocker modified allowing rear ride height to sit too high also allowing chain tension to alter |6.1.1b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Nearside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Offside Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |