Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Horn not working |1.7.3a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Registration plate issues | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Central Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not working when lights are on |1.7.3a| | 1 |
Rear reflector on motorcycle missing reflector is orange |1.4.1| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake hose damaged | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Valve stem seriously misaligned fouling brake caliper |5.2.3 |j|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front position lamp does not illuminate immediately when switched on side light in-op |1.1.3a| | 1 |
Exhaust mounting does not fully support the exhaust system both silencer clamps loose |7.1.1.c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Front An item not tested |Manual| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Wheel more than one fixing missing locking pin |5.2.1 |a| |ii|| | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Offside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Central Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Front Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Horn not working |1.6.2a| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Centre Headlamp insecure |1.7.3| | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Handlebar grip insecure to handlebar Both |2.2.1 |d| |ii|| | 1 |
Braking system does not have an approriate system/s fitted according to its age Rear master cylinder not operating |3.1.1| | 1 |
Front shock absorber seal failed and leaking oil Both |2.3.3| | 1 |
Handlebar handgrip not secure to handlebars. Both |2.1.1c| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Sidecar wheel bearings have excessive free play |5.2.3c| | 1 |
Sidecar wheel bearings are excessively rough |5.2.3d| | 1 |
Nearside Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Offside Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front shock absorber seal failed and leaking oil both front |2.3.3| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel system component leaking fuel leak from carbs. |7.2.1a| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Central Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |