Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 51 |
Registration plate issues | 42 |
Headlamp aim out of alignment | 21 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 13 |
Horn not working |1.7.3a| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 10 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear reflector missing (4.8.2 (a) (ii)) | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Front wheel bearings are excessively rough |2.3.5b| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Drive chain worn to excess |6.2.1e| | 7 |
Front Front wheel bearings have excessive free play |2.3.5b| | 7 |
Front Stop lamp missing |1.3.3a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn missing |1.7.1| | 5 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Rear Wheel spoke excessively loose |4.2.1b| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear reflector on motorcycle missing (1.4.1) | 5 |
Front wheel bearings have excessive free play (2.3.5b) | 5 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front wheel bearings are excessively rough (2.3.5b) | 4 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Front Brake caliper|s| insecure |3.2.A1j| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
Decelerometer brake test neither brake control achieves an efficiency of 25% |3.3.E1c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Wheel spoke excessively loose (4.2.1b) | 2 |
Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 2 |
Horn not loud enough to be heard by another road user (1.7.3a) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Position lamp switch faulty |1.1.4a| | 1 |
Decelerometer brake test no brake control achieves an efficiency of 30% |3.3.E1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Shock absorber has a serious fluid leak both forks |5.3.2 |b|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Steering headbearing excessively stiff or notchy with wheel raised (2.2.2 (f) (i)) | 1 |
Rear Wheel spoke excessively loose Multiple spokes loose (5.2.2 (d)) | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Shock absorber has a serious fluid leak both front forks (5.3.2 (b)) | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Suspension component pin or bush excessively worn linkage bearings (5.3.4 (a) (i)) | 1 |
Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Stop lamp missing (1.3.3a) | 1 |
Exhaust markings indicating not for road use or similar wording (7.1.4) | 1 |
Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Headlamp aim not tested (1.6) | 1 |
Front Drive chain sprocket worn to excess (6.2.1e) | 1 |
Drive chain worn to excess (6.2.1e) | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working when front or rear brake applied |4.3.1 |a| |ii|| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Stop lamp missing |4.3.1 |a| |ii|| | 1 |
Offside Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
Central Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies control one |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies control two |1.3.1a| | 1 |
Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front suspension assembly component excessively corroded. Both Fork Tubes Corroded Just Beneath Bottom Yoke. |2.3.1| | 1 |
Front Wheel spoke missing (5.2.2 (d)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Headlamp reflector missing |4.1.1 |b| |ii|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Handlebar mounting clamp bolt loose (2.1.1a) | 1 |
Headlamp insecure (1.2.3b) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Offside Footrest insecure split pin missing |6.2.1a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front shock absorber seal failed and leaking oil LHS oil seal leaking excessively |2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |