Most common failures | No# failures |
---|
Headlamp aim out of alignment | 52 |
Registration plate issues | 48 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Horn not working |1.7.3a| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Centre Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Registration plate lamp issues | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Stop lamp does not illuminate immediately a brake applies FRONT AND REAR |1.3.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Front shock absorber seal failed and leaking oil fork seals
|2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Steering lock stop loose |2.1.3| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Lower Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Upper Stop lamp switch with a delay in operation needs cleaning |4.3.2 |a| |ii|| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicator not working NSF and OFR operating together |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working OSF and NSR operating together |4.4.1 |a| |ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Hazard warning lamps not fitted |1.4.B.1a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working Not working from front brake. (4.3.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp Not flashing just dimming (4.4.3 (b)) | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp Not flashing just dimming (4.4.3 (b)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp adversely affected by the operation of another lamp Stop lamp / number plate illumination fault. (4.3.3 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |