| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 33 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Registration plate issues | 15 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Horn not working |1.7.3a| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear brake binding | 2 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Rear reflector missing |1.5.1a| | 2 |
| Offside Rear reflector missing |1.5.1a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear light brighter than stop lamp |1.3.1a| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Steering lock stop ineffective handlebars foul tank|both sides| |2.1.3| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Brake locking device missing rear brake arm |3.2.A1e| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Handlebar insecure |2.2.1 |d| |i|| | 1 |
| Stop lamp|s| not working on rear brake control. |4.3.1 |a| |ii|| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Brake performance not tested |3.3| | 1 |
| Offside Front Brake performance not tested |3.3| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Brake hose damaged | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front An item not tested |Manual| | 1 |
| Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Brakes imbalanced across an axle | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Throttle operating incorrectly sticking throttle |6.2.1f| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake effort inadequate at a wheel adjusted |1.2.1 |a| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake rod excessively damaged |3.2.A1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake component inadequately mounted Directional discs mounted in the incorrect direction |1.1.21 |c|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Rear brake disc contaminated by oil |3.5.1h| | 1 |
| Nearside Rear Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Rear fog lamp switch missing |1.3.1a| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear brake disc contaminated by grease |3.5.1h| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Offside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Front Brake disc insecure lock devices (1.1.14 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting has an unsafe modification pivot lock device requires attention (safty pin fitted ) (5.3.3 (c) (i)) | 1 |
| Nearside Rear Direction indicator not working (1.5.1c) | 1 |
| Rear Roller brake test indicates a severely grabbing brake (3.3.A1b) | 1 |
| Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Brake lever insecure pivot bolt loose (1.1.2 (e) (i)) | 1 |
| Handlebar mounting insecure mounting clamps loose (2.2.1 (a) (i)) | 1 |
| Central Front Position lamp not working Sidelight bulb not working, replaced PRS (4.2.1 (a)) | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Front Steering operation restricted in free movement from lock to lock Throttle increases with R/H lock ,cables restrict movement (2.1.4 (c)) | 1 |
| Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Stop lamp not working brake pedal switch bad connection (4.3.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Weld on rear axle holed on both sides of weld (5.3.6 (a) (i)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |