| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 65 |
| Rear reflector on motorcycle missing |1.4.1| | 43 |
| Horn not working |1.7.3a| | 30 |
| Steering headbearing has excessive free play |2.2.2| | 17 |
| Registration plate issues | 17 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 14 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 13 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 13 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 13 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Direction indicators not working |1.5.1c| | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 11 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 11 |
| Throttle operating incorrectly |6.2.1f| | 10 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Nearside Rear Footrest missing |6.2.1a| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear Footrest missing |6.2.1a| | 6 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 6 |
| Offside Rear Footrest missing |6.2.1a| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Direction indicator missing |1.5.1a| | 6 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Offside Front Direction indicator not working |1.5.1c| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 5 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Offside Front Direction indicators not working |1.5.1c| | 5 |
| Headlamp insecure |1.2.3b| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 5 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 4 |
| Front Direction indicator not working |1.5.1c| | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Direction indicator not working |1.5.1c| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Footrest insecure |6.2.1a| | 3 |
| Offside Front Direction indicator insecure |1.5.3b| | 3 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
| Rear reflector on motorcycle obscured |1.4.1| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Stop lamp missing |1.3.3a| | 2 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Nearside Footrest insecure |6.2.1a| | 2 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| An item not tested |Manual| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Offside Front Steering lock stop ineffective |2.1.3| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Horn is not continous or uniform |1.7.3c| | 2 |
| Indicator switch insecure |1.5.4| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Front Horn is not a constant note |1.7.3c| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Headlamp switch insecure |1.2.4| | 2 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Front Brake hose fouling |3.2.B3b| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Front Headlamp insecure |1.2.3b| | 2 |
| Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Brake lever insecure pivot lock nut missing |1.1.2 |e| |i|| | 1 |
| Front Brake linkage excessively corroded brake cannot be applied smoothly |1.1.15 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak ***** stanchion badly pitted will probably not seal **** |5.3.2 |b|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Rear Stop lamp insecure |1.3.3b| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Rear Lower Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front suspension assembly component excessively bent |2.3.1| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
| Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Brake lever cracked |3.1.2c| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Centre Rear Lower Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Centre Front Upper Brake hose excessively twisted |3.2.B3a| | 1 |
| Offside Front Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Centre Front Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake hose bulging under pressure |1.1.12 |d|| | 1 |
| Front Brake hose porous |1.1.12 |e|| | 1 |
| Rear Wheel has bolts/rivets missing or loose to the extent that control of the motorcycle is likely to be adversely affected sprocket retaining circlip missing |5.2.2 |e| |ii|| | 1 |
| Headlamp light source and lamp not compatible beam kick up wrong |4.1.4 |c|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Front suspension assembly component missing |2.3.1| | 1 |
| Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Nearside Front Handlebar deformed |2.1.1b| | 1 |
| Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Brake hose which buldges |3.2.B4| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Front Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator not working wire loose (4.4.1 (a) (ii)) | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Throttle operating incorrectly sticking. |6.2.7 |a| |i|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Offside Front Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake locking device missing reaction bracket |3.2.A1e| | 1 |
| Rear Brake locking device insecure no locking device on rear brake adjuster |3.2.A1e| | 1 |
| Brake pedal cracked |3.1.2c| | 1 |
| Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| All direction indicators not working NOT FLASHING |4.4.1 |a| |ii|| | 1 |
| Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Offside Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Centre Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Suspension arm pin or bush excessively worn swingarm (5.3.4 (a) (i)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |