| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 45 |
| Rear reflector on motorcycle missing |1.4.1| | 36 |
| Horn not working |1.7.3a| | 20 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 15 |
| Steering headbearing has excessive free play |2.2.2| | 15 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 13 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Registration plate issues | 11 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
| Drive chain excessively loose |6.2.1d| | 9 |
| Direction indicators not working |1.5.1c| | 8 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 8 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Nearside Rear Footrest missing |6.2.1a| | 6 |
| Offside Handlebar deformed |2.1.1b| | 6 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 6 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Brake locking device missing |3.2.A1e| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 4 |
| Rear reflector on motorcycle obscured |1.4.1| | 4 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Brake locking device missing |3.2.A1e| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Horn not working (1.7.3a) | 3 |
| Indicator tell tale not functioning |1.5.2| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 3 |
| Chain guard insecure |6.2.1c| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Brake hose excessively kinked |3.2.B3a| | 2 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Headlamp aim beam image too far to the right |1.6.4| | 2 |
| Front Headlamp aim not tested |1.6| | 2 |
| Brake hose damaged | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 2 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Rear Direction indicator missing |1.5.1a| | 2 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Brake hose leaking fluid |3.2.B4| | 2 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Rear Brake pedal insecure |3.1.2a| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Direction indicator missing |1.5.1a| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Rear Direction indicator missing |1.5.1a| | 2 |
| Nearside Front Handlebar deformed |2.1.1b| | 2 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Rear position lamp adversely affected by the operation of another lamp (1.1.3b) | 1 |
| Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Horn not working Horn not working |1.7.3a| | 1 |
| Front shock absorber seal failed and leaking oil Both forks seals leaking badly |2.3.3| | 1 |
| Steering movement excessively stiff with the wheel raised Head stock bearings stiff, Lock to lock |2.2.1b| | 1 |
| Drive chain worn to excess Drive chain and sprockets badly worn |6.2.1e| | 1 |
| Rear Rear shock absorber has inadequate damping effect. Rear shock absorber has no damping affect |2.4.A.3b| | 1 |
| Offside Brake lever has inadequate reserve travel hand |3.1.3b| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Centre Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Front Direction indicator damaged and function impaired Showing white light |1.5.3a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Rear sprocket bolts insecure |6.2.1h| | 1 |
| Nearside Handlebar fractured |2.1.1b| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Rear Chain guard missing |6.2.1c| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Offside Front Upper Brake lever excessively damaged |3.2.A1c| | 1 |
| Offside Front Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Drive chain excessively loose |6.2.1d| | 1 |
| Rear Brake clevis joint insecure (1.1.15 (c)) | 1 |
| Front Brake component inadequately mounted brake lever securing nut missing (1.1.21 (c)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure sidestand (6.1.1 (b) (i)) | 1 |
| Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
| Front position lamp incorrect colour (1.1.2a) | 1 |
| Front Lower Steering control handlebar movement restricted by trapped cables (2.1.2c) | 1 |
| Rear Brake pedal has inadequate reserve travel (3.1.3b) | 1 |
| Headlamp aim beam image kick up to the offside (1.6) | 1 |
| Rear Brake locking device missing (3.2.A1e) | 1 |
| Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
| Clutch lever positioned so it cannot be readily operated. (6.2.1g) | 1 |
| Centre Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Centre Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Lower Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Centre Front Headlamp aim not tested |1.6| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Offside Rear Brake cylinder severely damaged |3.2.B1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Direction indicator obscured |1.5.1a| | 1 |
| Offside Front Direction indicator obscured |1.5.1a| | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket |6.2.1h| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Centre Front Upper Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Horn emits 2 or more alternating tones |1.7.3b| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Centre Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Brake component modification unsafe rear brake pedal return spring incorrect (1.1.21 (d) (i)) | 1 |
| Stop lamp insecure |1.3.3b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Suspension arm pin or bush excessively worn Swingarm pivot bearing has excessive play (5.3.4 (a) (i)) | 1 |
| Suspension arm pin or bush excessively worn Shock to swingarm bearing has excessive play (5.3.4 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Offside Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear suspension bush has excessive free play LOWER SHOCK MOUNT |2.4.A2a|i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Inner Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Front Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Rear Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Front Upper Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake hose which buldges |3.2.B4| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Chain guard fouling another component |6.2.1c| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Central Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Brake lever is damaged and the brake cannot be readily applied FRONT |3.1.3c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |