| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 37 |
| Rear reflector on motorcycle missing |1.4.1| | 33 |
| Horn not working |1.7.3a| | 31 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 17 |
| Steering headbearing has excessive free play |2.2.2| | 15 |
| Registration plate issues | 13 |
| Throttle operating incorrectly |6.2.1f| | 12 |
| Drive chain excessively loose |6.2.1d| | 11 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 11 |
| Drive chain excessively tight |6.2.1d| | 10 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 10 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
| Headlamp aim beam image kick up to the offside |1.6| | 8 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 8 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 5 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Direction indicators not working |1.5.1c| | 5 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 4 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Offside Footrest insecure |6.2.1a| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 4 |
| Offside Rear Footrest missing |6.2.1a| | 4 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
| Direction indicator not working |1.5.1c| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 3 |
| Front Direction indicator insecure |1.5.3b| | 3 |
| Nearside Front Footrest insecure |6.2.1a| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Horn is not a constant note |1.7.3c| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front wheel insecure |4.2.3b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Brake lever attachment screws loose |3.1.2b| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Front Brake lever mounting insecure |3.1.2a| | 2 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
| Offside Rear Direction indicator missing |1.5.1a| | 2 |
| Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Direction indicator missing |1.5.1a| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Position lamp switch insecure |1.1.4b| | 2 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Brake lever attachment screws missing |3.1.2b| | 1 |
| Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls front brake light switch failed (4.3.2 (a) (iii)) | 1 |
| Wheel spindle locking device missing split pin/r clip missing from rear wheel spindle castellated nut (5.2.1 (d)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Direction indicator not working All |1.5.1c| | 1 |
| Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Horn missing |1.7.1| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| An item not tested |Manual| | 1 |
| Motorcycle structure adversely modified |6.1.1b| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Front Position lamp switch insecure |1.1.4b| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Upper Front suspension assembly component loose |2.3.1| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Lower Brake component modification unsafe split pin missing from rear brake arm (1.1.21 (d) (i)) | 1 |
| Nearside Upper Front suspension assembly component missing |2.3.1| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Brake lever attachment screws loose |3.1.2b| | 1 |
| Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Handlebar handgrip missing |2.1.1c| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Steering operation restricted in free movement from lock to lock ignition lock loose |2.1.4 |c|| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Central Front Steering operation restricted in free movement from lock to lock traps loom o/s/f (2.1.4 (c)) | 1 |
| Offside Rear Lower Brake rod insecure not on far enough (1.1.15 (c)) | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Front Front suspension assembly component missing |2.3.1| | 1 |
| Handlebar grip insecure to handlebar right one (2.2.1 (d) (ii)) | 1 |
| All direction indicators adversely affected by the operation of another lamp rear light (4.4.3 (b)) | 1 |
| Nearside Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Rear Stop lamp not working loose conectionat switch |4.3.1 |a| |ii|| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Brake hose damaged | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Rear Lower Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Centre Rear Lower Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Front Wheel fixing missing |single fixing| and rear |5.2.1 |a| |ii|| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Front position lamp damaged and function impaired bulb pushed back |1.1.1b| | 1 |
| Stop lamp affected by the operation of another lamp indicators effecting stop lamp |1.3.2| | 1 |
| Stop lamp does not illuminate immediately a brake applies req adjustment |1.3.1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Front Indicator switch insecure |1.5.4| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |