| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Rear reflector on motorcycle missing |1.4.1| | 18 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
| Horn not working |1.7.3a| | 10 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Registration plate issues | 5 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Brake pedal pivots excessively worn |3.1.3a| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Brake locking device missing |3.2.A1e| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Rear Direction indicator missing |1.5.1a| | 2 |
| Offside Rear Direction indicator missing |1.5.1a| | 2 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Nearside Front Handlebar deformed |2.1.1b| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Horn is not a constant note |1.7.3c| | 2 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Horn missing (1.7.1) | 1 |
| Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
| Front Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
| Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Handlebar deformed to the extent that steering is affected Left handle bar (2.2.1 (c) (ii)) | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Front Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Lower Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Front Horn missing |1.7.1| | 1 |
| Front Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Motorcycle structure cracked |6.1.1a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Upper Fork yoke excessively corroded. |2.1.1b| | 1 |
| Front Brake hose excessively twisted |3.2.B3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| An item not tested |Manual| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| All direction indicators not working all |4.4.1 |a| |ii|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Offside Front Brake cylinder insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Direction indicator missing ALL FOUR |1.5.1a| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment ARM HANGING OFF |3.2.A1i| | 1 |
| Throttle operating incorrectly VERY STIFF ON HANDLEBAR |6.2.1f| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Rear Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake back plate|s| insecure |3.2.A1j| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |