Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Registration plate issues | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 6 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Handlebar deformed |2.1.1b| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Headlamp aim beam image kick up to the offside (1.6) | 2 |
Rear reflector on motorcycle missing (1.4.1) | 2 |
Horn not working (1.7.3a) | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake component is excessively corroded |3.1.5| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Fuel tank insecure |6.1.3 |a| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Throttle operating incorrectly throttle sticking, more when bars are turned (6.2.1f) | 1 |
Direction indicators flashing more than 120 times per minute all four led indicators flashing too fast (1.5.1c) | 1 |
Fuel system component leaking excessively or a risk of fire fuel tap (6.1.3 (b) (ii)) | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Position lamp not working main beam |4.2.1 |a|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Rear Brake fluid contaminated |1.8 |a|| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front An item not tested |Manual| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Sidecar direction indicator not working |1.5.1c| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Outer All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake hose damaged | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Stop lamp not working Front stop switch (4.3.1 (a) (ii)) | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies control |1.3.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Upper Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Wheel has an excessively distorted bead rim. (4.2.2) | 1 |
Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Brake disc contaminated (1.1.14 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear brake binding | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Headlamp aim beam image kick up to the offside deflector blank fitted |1.6| | 1 |
Nearside Front Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
Offside Front Handlebar mounting insecure |2.2.1 |a| |i|| | 1 |
Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Rear Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
Rear Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |