Most common failures | No# failures |
---|
Headlamp aim out of alignment | 38 |
Drive chain excessively loose |6.2.1d| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Registration plate issues | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Brake disc|s| cracked |3.2.A1g| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Horn not working |1.7.3a| | 4 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Drive chain worn to excess |6.2.1e| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Registration plate lamp issues | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Direction indicators not working Also insecure. |1.5.1c| | 1 |
Front Stop lamp remains on when the brake is released freed off switch. may require future attention |1.3.1e| | 1 |
Front Shock absorber has a serious fluid leak both fork seals (5.3.2 (b)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering horns fitted incorrecly |2.1.2a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake hose damaged | 1 |
Horn not working (1.7.3a) | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake hose excessively twisted twisted due to insecure mounting, corrected (1.1.12 (b) (ii)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Suspension arm attachment bracket/mounting insecure mono link (5.3.3 (a) (i)) | 1 |
Offside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Offside Rear Direction indicator incorrect colour (1.5.1b) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Drive chain sprocket so loose it is likely to fail REAR SPR. BEARING (6.1.7 (c) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Offside Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Stop lamp does not illuminate immediately a brake applies control one, wiring damaged |1.3.1a| | 1 |
Stop lamp not working with front lever |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Inner Front Direction indicator not working |1.5.1c| | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Stop lamp not working pedal |4.3.1 |a| |ii|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Forks modification unsafe |2.2.2 |e|| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Rear Brake component is fractured |3.1.5| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |