| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 27 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Horn not working |1.7.3a| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Registration plate issues | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Brake hose fouling on front suspension |3.2.B3b| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Brake hose excessively deteriorated | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swing arm |2.4.A.2d| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear Drive chain sprocket excessively loose suspect carrier bearing? |6.1.7 |c| |i|| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Offside Rear Upper Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp not working Front switch (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| An item not tested |Manual| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear Upper Front mudguard insecure |2.3.7| | 1 |
| Offside Front Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Lower Brake excessively binding (1.2.1 (f)) | 1 |
| Central Front Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Central Front Upper Horn not working (7.7 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp dipped beam affected by the operation of another lamp INDACTORS AFFECT |1.2.2c| | 1 |
| Stop lamp affected by the operation of another lamp INDICATORS AFFECT |1.3.2| | 1 |
| All position lamps adversely affected by the operation of another lamp INDICATORS AFFECT |1.1.3b| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front |1.3.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Front Front suspension has inadequate damping effect. (2.3.6c) | 1 |
| Offside Front Front suspension has inadequate damping effect. (2.3.6c) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
| Nearside Front Direction indicators not working (1.5.1c) | 1 |
| Offside Rear Direction indicators not working (1.5.1c) | 1 |
| Horn not working (1.7.3a) | 1 |
| Central Rear Lower Rear shock absorber insecurely mounted Rear shock absorber snapped at lower mount point (2.4.A.3b) | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |