Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Horn not working |1.7.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Horn not working |1.7.3a| | 4 |
Registration plate issues | 4 |
Handlebar deformed |2.1.1b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
An item not tested |Manual| | 2 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Brake pedal insecure |3.1.2a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Suspension attachment bracket/mounting insecure pinch bolt missing (5.3.3 (a) (i)) | 1 |
Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Offside Front Front suspension assembly component loose |2.3.1| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Throttle operating incorrectly repaired, heated grip assy incorrect. (6.2.7 (a) (i)) | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Horn control defective |1.7.2a| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Outer Rear Direction indicators not working |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Nearside Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Offside Front Brake lining(s) incorrectly mounted hose clamp missing (1.1.13 (c)) | 1 |
Nearside Front Headlamp light intensity severely reduced main beam (4.1.4 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Outer Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |