Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Drive chain worn to excess |6.2.1e| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Registration plate issues | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Drive chain excessively loose |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not working |1.7.3a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Drive chain worn to excess |6.2.1e| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Horn control defective |1.7.2a| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Stop lamp not working front aND REAR |4.3.1 |a| |ii|| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
An item not tested |Manual| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake cable damaged |1.1.15 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Centre Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Suspension arm corroded and seriously weakened swinging arm |5.3.3 |b| |i|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Suspension component corroded and seriously weakened swing arm (5.3.3 (b) (i)) | 1 |
Nearside Indicator switch defective |1.5.4| | 1 |
Wheel more than one fixing missing Rear wheel spindle nut split pin |5.2.1 |a| |ii|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Inner Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Wheel spoke excessively bent |4.2.1b| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |