Most common failures | No# failures |
---|
Headlamp aim out of alignment | 89 |
Rear reflector on motorcycle missing |1.4.1| | 26 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 22 |
Drive chain excessively loose |6.2.1d| | 22 |
Registration plate issues | 17 |
Drive chain worn to excess |6.2.1e| | 16 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 14 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 11 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Drive chain sprocket worn to excess |6.2.1e| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
Horn not working |1.7.3a| | 7 |
Drive chain excessively tight |6.2.1d| | 6 |
Rear reflector on motorcycle obscured |1.4.1| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 5 |
Rear Drive chain worn to excess |6.2.1e| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Steering lock stop ineffective |2.1.3| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Headlamp insecure (4.1.1 (c)) | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Horn control defective |1.7.2a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Front suspension assembly component excessively misaligned |2.3.1| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Headlamp insecure (1.2.3b) | 1 |
Nearside Rear Drive chain excessively loose (6.2.1d) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle opens on full right lock |6.2.7 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Suspension arm corroded and seriously weakened Swingarm corroded on brace (5.3.3 (b) (i)) | 1 |
Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Brake component modification unsafe locking nut missing from rear brake rod (1.1.21 (d) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Indicator switch insecure |1.5.4| | 1 |
An item not tested |Manual| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake lever excessively worn Lever on the drum insecure worn out spline on lever. |1.1.15 |b|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake caliper leaking |1.1.16 |b| |i|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Plate brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Nearside Rear Chain guard insecure |6.1.7 |i|| | 1 |
Offside Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension component excessively corroded. swinging arm |2.4.A.1a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Brake lever cracked |3.1.2c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Headlamp switch faulty |1.2.4| | 1 |
Outer Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering operation restricted in free movement from lock to lock notchy lock to lock |2.1.4 |c|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected |5.2.2 |c| |ii|| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake performance not tested |3.3| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Horn not working (7.7 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |