| Most common failures | No# failures |
|---|
| Horn not working |1.7.3a| | 40 |
| Rear reflector on motorcycle missing |1.4.1| | 36 |
| Headlamp aim out of alignment | 22 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 20 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 19 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 17 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 17 |
| Registration plate issues | 17 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 16 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Direction indicators not working |1.5.1c| | 9 |
| Rear Direction indicators not working |1.5.1c| | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Offside Rear Direction indicator not working |1.5.1c| | 8 |
| Nearside Rear Direction indicator not working |1.5.1c| | 8 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 7 |
| Front Direction indicators not working |1.5.1c| | 7 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
| Nearside Rear Direction indicators not working |1.5.1c| | 7 |
| Front Steering headbearing has excessive free play |2.2.2| | 7 |
| Rear Brake locking device missing |3.2.A1e| | 6 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 6 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Rear Direction indicator not working |1.5.1c| | 6 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 6 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 5 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 5 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Offside Rear Direction indicators not working |1.5.1c| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Offside Direction indicator not working |1.5.1c| | 4 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear Wheel spoke excessively loose |4.2.1b| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front mudguard insecure |2.3.7| | 3 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 3 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 3 |
| Stop lamp affected by the operation of the horn |1.3.2| | 3 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Offside Steering lock stop ineffective |2.1.3| | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear suspension component loose |2.4.A.1a| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Front Direction indicator missing |1.5.1a| | 2 |
| Rear Direction indicator missing |1.5.1a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Footrest insecure |6.2.1a| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| An item not tested |Manual| | 2 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Front Brake lever insecure |3.1.2a| | 2 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 2 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 2 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
| Front Brake lever mounting insecure |3.1.2a| | 2 |
| Horn control not functioning. |1.7.2b| | 2 |
| Front Stop lamp missing |1.3.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 2 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
| Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain horseshoe link on backwards |6.2.1h| | 1 |
| Direction indicators affected by the operation of another lamp all |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake light u/s |1.3.1a| | 1 |
| Horn is not a constant note bulb horn not pre 1973 |1.7.3c| | 1 |
| Front Front wheel spindle securing nut locking device missing split pin missing front |2.3.3a| | 1 |
| Front Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Nearside Rear suspension component seized |2.4A2a|ii|| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear An item not tested |Manual| | 1 |
| Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Motorcycle structure cracked |6.1.1a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Throttle operating incorrectly Cable requires replacement |6.2.1f| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain link clip missing |6.2.1h| | 1 |
| Rear position lamp adversely affected by the operation of another lamp Pulsing with indicator |1.1.3b| | 1 |
| Stop lamp affected by the operation of another lamp Pulsing with indicator |1.3.2| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Offside Drive chain worn to excess |6.2.1e| | 1 |
| Offside Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Horn emits 2 or more alternating tones |1.7.3b| | 1 |
| Front Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp rear light brighter than stop |1.1.3b| | 1 |
| Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Brake component inadequately mounted rear brake not working |1.1.21 |c|| | 1 |
| Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Brake reaction bracket excessively worn loose and not secure |1.1.15 |b|| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Stop lamp not working STOP LAMP COMES ON WITH LIGHTS, POSITION LAMP LIT WHEN LIGHTS OFF (4.3.1 (a) (ii)) | 1 |
| Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Horn not working (1.7.3a) | 1 |
| Headlamp dipped beam affected by the operation of another lamp (1.2.2c) | 1 |
| Rear position lamp adversely affected by the operation of another lamp (1.1.3b) | 1 |
| Stop lamp affected by the operation of another lamp (1.3.2) | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Headlamp deteriorated and function impaired Lamp flickers when moved/tapped |low beam| |1.2.3a| | 1 |
| Direction indicator deteriorated and function impaired All |1.5.3a| | 1 |
| Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Brake lever insecure |3.1.2a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Offside Front Footrest missing |6.2.1a| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam no dip beam |1.2.2a|i|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies no brake light |1.3.1a| | 1 |
| Front Front shock absorber seal failed and leaking oil both forks leaking oil |2.3.3| | 1 |
| Front Wheel spoke excessively loose loose spokes wheel unsafe |4.2.1b| | 1 |
| Rear Drive chain excessively loose excessively loose |6.2.1d| | 1 |
| Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Fuel pipe so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Drive chain horseshoe locking device incorrectly fitted Twice! |6.1.7 |j| |i|| | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure Torque arm split pin |front| missing |6.1.1 |b| |i|| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp Effects all lights when operated with any brake light. |4.4.3 |b|| | 1 |
| Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp adversely affected by the operation of another lamp affected when indicator is active |4.3.3 |b|| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Rear Upper Brake locking device missing |3.2.A1e| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Fuel pipe insecure no clip (6.1.3 (a) (i)) | 1 |
| Offside Rear Brake pivot excessively worn (1.1.15 (b)) | 1 |
| Offside Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake cable badly frayed |3.2.A1b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Horn missing |1.7.1| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Shock absorber has a serious fluid leak shockers (5.3.2 (b)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Offside Outer Handlebar deformed |2.1.1b| | 1 |
| Brake cable excessively corroded |3.2.A1b| | 1 |
| Front Suspension component mounting has an unsafe modification forks fitted wrong way around (5.3.3 (c) (i)) | 1 |
| Shock absorber insecurely attached washers missing off shocks (5.3.2 (a) (i)) | 1 |
| Inner Front Lower Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Brake cable badly frayed |3.2.A1b| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Direction indicator missing all |1.5.1a| | 1 |
| Steering headbearing has excessive free play top nut loose |2.2.2| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Front Wheel fixing missing |single fixing| |5.2.1 |a| |ii|| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies switch faulty
|1.3.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Direction indicator not working all 4 not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Brake linkage excessively damaged |3.2.A1c| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Rear Built up wheel has a bolt/s missing |4.2.1c| | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Registration plate lamp issues | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |