Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 24 |
Headlamp aim out of alignment | 21 |
Horn not working |1.7.3a| | 17 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Registration plate issues | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Nearside Rear Direction indicator not working |1.5.1c| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Brake locking device missing |3.2.A1e| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Offside Front Direction indicator missing |1.5.1a| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Front Horn not working |1.7.3a| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Rear Rear suspension component loose |2.4.A.1a| | 2 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Front Footrest insecure |6.2.1a| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 2 |
Rear Direction indicator insecure |1.5.3b| | 2 |
Horn is not continous or uniform |1.7.3c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Brake cable knotted |3.2.A1b| | 1 |
Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Headlamp aim not tested |1.6| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Horn replaced by a gong |1.7.3b| | 1 |
Offside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Footrest insecure |6.2.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp may need new battery to rectifiy (4.4.3 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Footrest insecure footrest mount has fractured right hand side (6.2.12 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp stop lamp illuminates when lights are on (4.3.3 (b)) | 1 |
Centre Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Central Front Position lamp missing front position light missing in headlight |4.2.1 |a|| | 1 |
Central Front Headlamp insecure headlight lens loose |4.1.1 |c|| | 1 |
Front Steering headbearing excessively stiff or notchy steering head bearings feel stiff |2.2.2 |f| |i|| | 1 |
Offside Rear Steering linkage locking device missing rear brake arm missing locking device |2.1.3 |d|| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Inner Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Indicator tell tale not functioning |1.5.2| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Rear Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Centre Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Horn is not a constant note affected by indicators |1.7.3c| | 1 |
Direction indicator deteriorated and function impaired all very dim |1.5.3a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |