Most common failures | No# failures |
---|
Headlamp aim out of alignment | 32 |
Registration plate issues | 14 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Horn not working |1.7.3a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Front Horn not working |1.7.3a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear reflector missing Temporary one put on |4.8.2 |a| |ii|| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake master cylinder severely corroded |3.2.B1b| | 1 |
Nearside Exhaust mounting missing |7.1.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering operation restricted in free movement from lock to lock brake lever touches clock ,horn catches front fork ,speedo cable (2.1.4 (c)) | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Position lamp adversely affected by the operation of another lamp also dip beam affected (4.2.3 (b)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Upper Suspension component pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension component misaligned |2.4.A.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Horn missing |1.7.1| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Wheel more than one fixing missing split pin (5.2.1 (a) (ii)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Brake disc fractured cracked (1.1.14 (a) (ii)) | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Position lamp light intensity significantly reduced not working |4.2.3 |a| |ii|| | 1 |
Rear Brake pedal has insufficient reserve travel down to bottom spongey |1.1.2 |a|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect Left hand drive headlamp fitted (4.1.2 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak Fork seal leaking (5.3.2 (b)) | 1 |
Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Suspension arm pin or bush excessively worn Mono shock linkage bushes excessively worn. (5.3.4 (a) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Wheel fixing missing (single fixing) split pin missing front wheel nut replaced at station (5.2.1 (a) (ii)) | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Nearside Front Exhaust mounting missing |7.1.1c| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure brake arm insecure and locking pin missing (6.1.1 (b) (i)) | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |