Most common failures | No# failures |
---|
Headlamp aim out of alignment | 47 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Registration plate issues | 12 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 2 |
Front An item not tested |Manual| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear wheel spindle securing nut locking device missing no split pin in rear spindle fitted new pin |2.4.A.2b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake component insecure rear brake torque arm |1.1.21 |c|| | 1 |
Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
Offside Front Brake locking device missing |3.2.A1e| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake component insecure reaction bkt loose prs (1.1.21 (c)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing torque arm bolt missing |3.2.A1j| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Central Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Brake reaction bracket insecure Split pin missing at rear brake torque arm |3.2.A1j| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Brake hose damaged | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Rear Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp aim beam image kick up to the offside beaam converter fitted |1.6| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain sprocket carrier worn to excess loose locking nuts |6.2.1e| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Wheel more than one fixing missing missing split pin |5.2.1 |a| |ii|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp missing |4.2.1 |a|| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Front Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Offside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Suspension arm attachment bracket/mounting insecure rear swinging arm (5.3.3 (a) (i)) | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Central Front Lower Brake excessively binding |1.2.1 |f|| | 1 |
Central Front Upper Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Suspension attachment bracket/mounting insecure swing arm pivot bolt insecure (5.3.3 (a) (i)) | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Fuel hose leaking |7.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Centre Front Horn is not a constant note |1.7.3c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Horn not working missing |7.7 |a| |ii|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake component insecure brake reaction bracket |1.1.21 |c|| | 1 |