MOT History from tests of petrol YAMAHA NXC125s year 2006

Review the list of common YAMAHA NXC125 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:81.34%

(The average a petrol YAMAHA NXC125 year 2006 passes without issue)

Based on:2,487 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	44
Front Roller brake test indicates a binding brake \|3.3.A1a\|	39
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	35
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	21
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	19
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	14
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	13
Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Registration plate issues	10
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	9
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	9
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	9
Horn not working \|1.7.3a\|	9
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	8
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	8
Stop lamp remains on when the brakes are released	7
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Floor brake test indicates a binding brake \|3.3.C2c\|	6
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	5
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	4
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	4
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	4
Offside Front Direction indicator incorrect colour \|1.5.1b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear wheel bearings have excessive free play \|2.4.A.2c\|	3
Horn not working (7.7 (a))	3
Headlamp insecure \|1.2.3b\|	3
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Front Valve stem seriously damaged \|5.2.3 \|j\|\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn control defective \|1.7.2a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear Brake lever pivots excessively worn \|3.1.3a\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Roller brake test indicates a binding brake \|3.3.A1a\|	2
Nearside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Nearside Front Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	2
Front mudguard insecure \|2.3.7\|	2
Riders seat insecure \|6.2.1a\|	2
Nearside Shock absorber has a serious fluid leak (5.3.2 (b))	2
Offside Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Handlebar deformed \|2.1.1b\|	2
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front Position lamp not working (4.2.1 (a))	2
Front Brake disc contaminated (1.1.14 (b))	2
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))	2
Horn sound not in accordance with requirements (7.7 (c))	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Fuel cap sealing washer deteriorated \|7.2.2c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	44
Front Roller brake test indicates a binding brake \|3.3.A1a\|	39
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	35
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	21
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	19
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	14
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	13
Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Registration plate issues	10
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	9
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	9
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	9
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	9
Horn not working \|1.7.3a\|	9
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	8
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	8
Stop lamp remains on when the brakes are released	7
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Floor brake test indicates a binding brake \|3.3.C2c\|	6
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	5
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	4
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	4
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	4
Offside Front Direction indicator incorrect colour \|1.5.1b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear wheel bearings have excessive free play \|2.4.A.2c\|	3
Horn not working (7.7 (a))	3
Headlamp insecure \|1.2.3b\|	3
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	3
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Front Valve stem seriously damaged \|5.2.3 \|j\|\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn control defective \|1.7.2a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Fairings insecure and likely to impede the steering \|2.1.2e\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear Brake lever pivots excessively worn \|3.1.3a\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Roller brake test indicates a binding brake \|3.3.A1a\|	2
Nearside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Nearside Front Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	2
Front mudguard insecure \|2.3.7\|	2
Riders seat insecure \|6.2.1a\|	2
Nearside Shock absorber has a serious fluid leak (5.3.2 (b))	2
Offside Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Handlebar deformed \|2.1.1b\|	2
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front Position lamp not working (4.2.1 (a))	2
Front Brake disc contaminated (1.1.14 (b))	2
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))	2
Horn sound not in accordance with requirements (7.7 (c))	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Fuel cap sealing washer deteriorated \|7.2.2c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	2

MOT History from tests of petrol YAMAHA NXC125s year 2006

Find us on Facebook