Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Horn not working |1.7.3a| | 9 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Headlamp aim out of alignment | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Stop lamp remains on when the brakes are released | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Registration plate issues | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Horn not working intermitant (7.7 (a)) | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Brake lever has inadequate reserve travel rear brake lever has to much travel, adjusted up ok now |3.1.3b| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Direction indicators flashing less than 60 times a minute at idle speed |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp stop flashing when brake is applied or high beam is switched on |1.5.1c| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear suspension bush excessively deteriorated bottom suspension arm |2.4.A2a|i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Offside Front Lower Brake excessively binding caliper pistons sticking on rectified |1.2.1 |f|| | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Front Brake caliper has no reserve travel and braking performance affected brake seized |1.1.16 |e| |ii|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Valve stem seriously damaged leaking air, like to fail 120 70 12 (5.2.3 (j)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen no pattern (4.1.2 (a)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Brake lever has insufficient reserve travel rear brake lever (1.1.2 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Rear Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Steering operation impeded by a fairing |2.1.4 |e|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam front |1.2.2a|i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp not working on dipped beam headlamp lamp (4.1.1 (a) (ii)) | 1 |
Front Wheel hub worn to the extent that wheel security is adversely affected worn wheel bearings (5.2.1 (b) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear suspension movement is excessively stiff LOCKED SUSPENSION STANCHIONS |2.4.A.3b| | 1 |
Front Front position lamp incorrect colour replaced bulb |1.1.2a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Registration plate lamp issues | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Brake performance not tested |3.3| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy notchy in centre position (2.2.2 (f) (i)) | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake performance not tested |3.3| | 1 |
Horn not working (7.7 (a)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Throttle operating incorrectly Handlebar grip loose (6.2.7 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Offside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak nearside fork seal leaking (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak offside fork seal leaking (5.3.2 (b)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |