Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Rear reflector on motorcycle missing |1.4.1| | 24 |
Registration plate issues | 23 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Horn not working |1.7.3a| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Offside Front Footrest insecure |6.2.1a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 2 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen both have no pattern |1.6.B.1| | 2 |
Horn not working not working when lights are on dip or main beam |1.7.3a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Seat insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Brake caliper|s| insecure |3.2.A1j| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake lever excessively chafed |3.2.A1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
Offside Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust is leaking and excessively noisey at headers |7.1.1b| | 1 |
Nearside Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Handlebar cracked |2.1.1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp aim does not move downwards when dipped |1.6.5| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Lower Horn not working |1.7.3a| | 1 |
Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Direction indicator incorrect colour both |1.5.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |