| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 24 |
| Registration plate issues | 19 |
| Headlamp aim out of alignment | 16 |
| Rear Brake disc|s| cracked |3.2.A1g| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 4 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Horn not working |1.7.3a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Brake hose leaking fluid |3.2.B4| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Nearside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Upper Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Handlebar mounting clamp loose clips underneath |2.1.1a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Footrest insecure riders |6.2.1a| | 1 |
| Rear Footrest missing both |6.2.12 |a|| | 1 |
| Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Horn not working |1.7.3a| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Footrest insecure POOR REPAIR |6.2.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Direction indicators affected by the operation of another lamp both |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake lever attachment screws missing no lock nut on pivot |3.1.2b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose no lock pin |3.2.A1j| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Rear position lamp missing |1.1.1a| | 1 |
| Front Steering lock stop maladjusted |2.1.3| | 1 |
| Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Brake component insecure caliper mounting arm (1.1.21 (c)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Upper Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls rear light (4.3.2 (a) (iii)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |