Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 32 |
Headlamp aim out of alignment | 31 |
Registration plate issues | 23 |
Rear Brake disc|s| cracked |3.2.A1g| | 15 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Horn not working |1.7.3a| | 5 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front suspension assembly component excessively misaligned |2.3.1| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Front Handlebar deformed |2.1.1b| | 2 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake clevis joint insecure rear split pin missing (1.1.15 (c)) | 1 |
Nearside Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Nearside Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Offside Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Offside Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Nearside Front Wheel fixing missing (single fixing) Slit pin missing. (5.2.1 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Lower Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
An item not tested |Manual| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear position lamp does not face the rear |1.1.1d| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Offside Headlamp switch insecure |1.2.4| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp not working BOTH (4.3.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Throttle operating incorrectly throttle sticking |6.2.1f| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front position lamp missing bulb not working |1.1.1a| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Central Rear Lower Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Seat insecure |6.2.1a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front position lamp incorrect colour showing red |1.1.2a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |