| Most common failures | No# failures |
|---|
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
| Rear reflector on motorcycle missing |1.4.1| | 38 |
| Headlamp aim out of alignment | 38 |
| Registration plate issues | 26 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear Brake disc|s| cracked |3.2.A1g| | 13 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 12 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Horn not working |1.7.3a| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Front wheel bearings have excessive free play |2.3.5b| | 8 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Front position lamp incorrect colour |1.1.2a| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Offside Rear Brake disc|s| cracked |3.2.A1g| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear reflector on sidecar missing |1.4.1| | 2 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 2 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear suspension bush has excessive free play linkage |2.4.A2a|i|| | 1 |
| Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Headlamp missing |1.2.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Lower Footrest insecure |6.2.1a| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Brake hose excessively deteriorated | 1 |
| Registration plate lamp issues | 1 |
| Rear Lower Headlamp insecure |1.2.3b| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Brake hose leaking |1.1.12 |c|| | 1 |
| Offside Rear Lower Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Front An item not tested |Manual| | 1 |
| Nearside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Offside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Front Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Lower Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Offside Front Lower Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Centre Front Upper Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Front Upper Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Lower Brake component is fractured |3.1.5| | 1 |
| Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Stop lamp not working on front brake (4.3.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Brake component is fractured |3.1.5| | 1 |
| Offside Front Brake component is fractured |3.1.5| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Exhaust silencer likely to become detached Exhaust end cap (8.1.1 (b) (ii)) | 1 |
| Rear Drive chain so loose it is likely to fail Rear adjuster loose (6.1.7 (c) (ii)) | 1 |
| Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Headlamp insecure |1.2.3b| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Front suspension assembly component missing |2.3.1| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain fouling another component |6.2.1d| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Headlamp insecure |1.2.3b| | 1 |
| Offside Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Central Fuel system component leaking leaking whilst running (6.1.3 (b) (i)) | 1 |
| Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Brake disc|s| cracked |3.2.A1g| | 1 |
| Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Lower Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Headlamp insecure |1.2.3b| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| An item not tested |Manual| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear |1.3.1a| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Roller brake test indicates a binding brake Pads are old against new disc,s |3.3.A1a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Fuel system component leaking tap |7.2.1a| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Central Front Horn not working |7.7 |a| |ii|| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Centre Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp aim projected beam image obviously incorrect kick up to the right (4.1.2 (c)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |