Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 18 |
Headlamp aim out of alignment | 16 |
Registration plate issues | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Brake disc|s| cracked |3.2.A1g| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Handlebar deformed |2.1.1b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Drive chain excessively tight LINKS SEIZED |6.2.1d| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Brake hose excessively deteriorated | 1 |
Brake locking device missing reaction bracket |3.2.A1e| | 1 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Brake anchor bar lock pin missing. |6.1.1 |b| |i|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Rear Motorcycle structure excessively corroded rear swing arm has corroded resulting in a hole close to mounting point |6.1.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Offside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the steering front end not straight in yokes |2.5.1| | 1 |
Front Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Headlamp insecure |1.2.3b| | 1 |
Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |