Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Registration plate issues | 9 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Horn not working |1.7.3a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Front Front mudguard insecure |2.3.7| | 2 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Rear Indicator tell tale not functioning |1.5.2| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear suspension component loose |2.4.A.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Outer Direction indicators not working |1.5.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Exhaust has a major leak of exhaust gases headers |6.1.2 |a|| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Front Brake hose connection leaking |1.1.12 |c|| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Steering lock stop maladjusted |2.1.3| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Nearside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Footrest insecure both sides |6.2.1a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Registration plate lamp issues | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Headlamp aim beam image too far to the left |1.6.4| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |