| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Headlamp aim out of alignment | 11 |
| Registration plate issues | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Horn not working |1.7.3a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Brake disc|s| cracked |3.2.A1g| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front position lamp missing |1.1.1a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Brake locking device insecure |3.2.A1e| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Rear Drive chain so worn it is likely to fail Links seized in chain. |6.1.7 |c| |ii|| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| An item not tested |Manual| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Motorcycle structure excessively damaged mirror fixing is broken and insecure |6.1.1a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mudguard fouling wheel |6.1.1c| | 1 |
| Rear Stop lamp remains on when the brake is released pedal |1.3.1e| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Central Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Rear Lower Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Lower Chain guard insecure |6.2.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Drive chain excessively loose Adjusted but now at end of adjustment (6.1.7 (c) (i)) | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake component insecure Rear brake torque arm missing split pins. |1.1.21 |c|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Front Fuel tank insecure Fuel tank securing bolts missing. [Replaced]. (6.1.3 (a) (i)) | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |