| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 31 |
| Horn not working |1.7.3a| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Registration plate issues | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 5 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Horn missing |1.7.1| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Inner Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Outer Front Upper Horn not working |1.7.3a| | 1 |
| Centre Rear Lower Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Brake component is excessively corroded |3.1.5| | 1 |
| Offside Brake component is excessively corroded |3.1.5| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Indicator switch defective |1.5.4| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Nearside Rear Outer Suspension arm pin or bush excessively worn sidecar linkage (5.3.4 (a) (i)) | 1 |
| Sidecar wheel alignment has excessive toe-out (2.4 (b)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Fuel tank leaking |7.2.1a| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
| Nearside Front suspension assembly component loose |2.3.1| | 1 |
| Lower Front suspension assembly component loose |2.3.1| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swing arm |2.4.A.2d| | 1 |
| Rear suspension component seized lower links |2.4A2a|ii|| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Brake lining(s) contaminated (1.1.13 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Brake lining(s) contaminated (1.1.13 (b)) | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Suspension rod pin or bush excessively worn rear link arms at swinging mounting |5.3.4 |a| |i|| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension axle bolt hitting exhaust cans |2.4.A.3a| | 1 |
| Rear Sidecar structure joining/attachment plate or fastening insecure nut to bike loose |6.1.1 |b| |i|| | 1 |
| Brake pedal pivot excessively worn |1.1.1 |b|| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Steering damper in such a condition that the steering action is adversely affected |2.1.4 |d| |ii|| | 1 |
| Steering linkage component modification unsafe |2.1.3 |f| |i|| | 1 |
| Steering linkage component modified such that the steering is adversely affected |2.1.3 |f| |ii|| | 1 |
| Steering linkage likely to become detached |2.1.3 |a| |ii|| | 1 |
| Suspension component mounting has an unsafe modification sidecar suspension unit insecure |5.3.3 |c| |i|| | 1 |
| Suspension component attachment bracket/mounting likely to fail side car suspension unit |5.3.3 |b| |ii|| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |