Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 14 |
Headlamp aim out of alignment | 11 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Horn not working |1.7.3a| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Direction indicators not working |1.5.1c| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Stop lamp missing |1.3.3a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear position lamp damaged and function impaired |1.1.1b| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Brake lever insecure |3.1.2a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Registration plate issues | 2 |
Headlamp switch insecure |1.2.4| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Indicator switch defective |1.5.4| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Riders seat insecure |6.2.1a| | 1 |
Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Suspension rod insecure and control of the motorcycle impaired (5.3.3 (a) (ii)) | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Fuel system component leaking fuel tap |7.2.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Offside Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Lower Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Centre Front Lower Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Centre Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Horn not working (7.7 (a)) | 1 |