| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 47 |
| Rear reflector on motorcycle missing |1.4.1| | 20 |
| Registration plate issues | 18 |
| Drive chain excessively loose |6.2.1d| | 13 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Headlamp aim beam image kick up to the offside |1.6| | 9 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
| Front Wheel spoke excessively loose |4.2.1b| | 8 |
| Horn not working |1.7.3a| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Registration plate lamp issues | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Direction indicators not working |1.5.1c| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Indicator switch defective |1.5.4| | 3 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Rear Brake hose which buldges |3.2.B4| | 2 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Centre Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| An item not tested |Manual| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Offside Rear Footrest missing |6.2.1a| | 2 |
| Direction indicator missing |1.5.1a| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Front An item not tested |Manual| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Rear position lamp damaged and function impaired |1.1.1b| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Rear Suspension component pin or bush excessively worn lower linkages (5.3.4 (a) (i)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Central Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Wheel spoke missing (5.2.2 (d)) | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Inner Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Centre Rear Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies Both |1.3.1a| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Brake performance not tested |3.3| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Stop lamp obscured |1.3.1c| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Drive chain horseshoe locking device likely to become detached missing |6.1.7 |j| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear Stop lamp not working FOOT BRAKE (4.3.1 (a) (ii)) | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Rear Brake pedal mounting insecure split pin missing |3.1.2a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure rack bolt missing (6.1.1 (b) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake hose excessively twisted |3.2.B3a| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear An item not tested |Manual| | 1 |
| Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Centre Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| All direction indicators adversely affected by the operation of another lamp Illuminating but not flashing (battery completely flat MAY be the cause) (4.4.3 (b)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Rear Brake hose porous (1.1.12 (e)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake cylinder inadequately mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
| Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Nearside Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link fitted in wrong direction |6.2.1h| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam When on dip light is on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Wheel spoke cracked. |4.2.1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Headlamp aim not tested |1.6| | 1 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Brake disc significantly and obviously worn front |1.1.14 |a| |i|| | 1 |
| Brake disc significantly and obviously worn rear |1.1.14 |a| |i|| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Throttle operating incorrectly Revs increase when bars turned. |6.2.7 |a| |i|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Throttle operating incorrectly rev increase when steering is turned (6.2.7 (a) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |