Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Rear reflector on motorcycle missing |1.4.1| | 13 |
Registration plate issues | 13 |
Drive chain worn to excess |6.2.1e| | 12 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Offside Rear Footrest missing |6.2.1a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Direction indicators not working |1.5.1c| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Stop lamp affected by the operation of another lamp |1.3.2| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Horn not working |1.7.3a| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Offside Rear Direction indicator missing |1.5.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Brake hose damaged | 2 |
Rear Wheel spoke missing |4.2.1b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Centre Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Centre Front Headlamp aim not tested |1.6| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Front Wheel spoke excessively loose x4 (5.2.2 (d)) | 1 |
Front Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Brake lever attachment screws missing |3.1.2b| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake pedal attachment screws missing. |3.1.2b| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Centre Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Centre Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Stop lamp not working Off front brake lever (4.3.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Brake hose excessively deteriorated | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Lower Suspension rod pin or bush excessively worn Doglink (5.3.4 (a) (i)) | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake component inadequately mounted master cylinder |1.1.21 |c|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Horn control defective |1.7.2a| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Rear Wheel spoke excessively corroded 1x broken spoke |5.2.2 |d|| | 1 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
All direction indicators adversely affected by the operation of another lamp all indicators flashing together (4.4.3 (b)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Footrest insecure SPLIT PINS MISSING |6.2.12 |a|| | 1 |
Offside Footrest insecure SPLIT PIN MISSING |6.2.12 |a|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |