| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 50 |
| Registration plate issues | 31 |
| Horn not working |1.7.3a| | 20 |
| Rear reflector on motorcycle missing |1.4.1| | 20 |
| Drive chain excessively loose |6.2.1d| | 14 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Drive chain worn to excess |6.2.1e| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Rear Wheel spoke excessively loose |4.2.1b| | 9 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
| Direction indicators not working |1.5.1c| | 6 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Nearside Rear Footrest missing |6.2.1a| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Nearside Rear Direction indicators not working |1.5.1c| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Brake hose damaged | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Rear Direction indicators not working |1.5.1c| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Wheel spoke excessively loose |4.2.1b| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Fuel system component leaking |7.2.1a| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Footrest missing |6.2.1a| | 3 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
| Front Direction indicators not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
| Wheel spoke excessively loose |4.2.1b| | 3 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Direction indicator not working |1.5.1c| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| An item not tested |Manual| | 2 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear Wheel spoke missing |4.2.1b| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Brake pedal insecure |3.1.2a| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Rear wheel insecure |4.2.3b| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Direction indicators not working |1.5.1c| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Brake component has an inadequate repair |3.1.5| | 2 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Offside Front Direction indicator missing |1.5.1a| | 2 |
| Nearside Rear Direction indicator missing |1.5.1a| | 2 |
| Offside Rear Direction indicator missing |1.5.1a| | 2 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Connecting link incorrectly fitted |6.2.1h| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Front Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Rear Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Rear Lower Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| All direction indicators not working front & rear indicators do not work on any side (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working rear brake light does not work off front brake control (4.3.1 (a) (ii)) | 1 |
| Stop lamp not working rear brake light does not work off rear brake control (4.3.1 (a) (ii)) | 1 |
| Horn not working horn does not work when pressed (7.7 (a)) | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Nearside Front Direction indicator obscured |1.5.1a| | 1 |
| Offside Front Direction indicator obscured |1.5.1a| | 1 |
| Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
| Offside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
| Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
| Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Brake excessively binding (1.2.1 (f)) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Nearside Rear Direction indicator insecure (1.5.3b) | 1 |
| Front wheel spindle securing nut(s) loose (2.3.5a) | 1 |
| Brake pedal insecure (3.1.2a) | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Rear Brake hose bulging under pressure |1.1.12 |d|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Registration plate lamp issues | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Upper Horn is not continous or uniform |1.7.3c| | 1 |
| Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Nearside Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Exhaust mounting missing |7.1.1c| | 1 |
| Fork yoke insecure top nut loose (2.2.2 (d) (i)) | 1 |
| Fuel cap ineffective seal broken (6.1.3 (b) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Brake lever pivots excessively worn |3.1.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Split link |6.2.1h| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Stop lamp does not illuminate immediately a brake applies On foot brake |1.3.1a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Secondly locking device missing on rear spindle |6.2.1h| | 1 |
| Drive chain sprocket worn to excess Both |6.2.1e| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Brake disc|s| is excessively distorted Brake caliper rubbing disc due to modification! |3.2.A1m| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Offside Rear reflector on motorcycle missing |1.4.1| | 1 |
| Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front An item not tested |Manual| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel spindle split pin missing |6.2.1h| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Centre Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp not working on dipped beam Aim not checked (4.1.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension rod attachment bracket/mounting insecure Bolt missing in suspension linkage. (5.3.3 (a) (i)) | 1 |
| Rear Brake disc contaminated grease from rear hub bearing (1.1.14 (b)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Wheel corroded to the extent that control of the motorcycle is likely to be adversely affected |5.2.2 |c| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake component is fractured |3.1.5| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Stop lamp does not emit a steady light both |1.3.1b| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Nearside Handlebar handgrip missing |2.1.1c| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |