| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 65 |
| Registration plate issues | 32 |
| Rear reflector on motorcycle missing |1.4.1| | 27 |
| Drive chain excessively loose |6.2.1d| | 19 |
| Horn not working |1.7.3a| | 18 |
| Rear Wheel spoke excessively loose |4.2.1b| | 17 |
| Steering headbearing has excessive free play |2.2.2| | 16 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
| Drive chain worn to excess |6.2.1e| | 15 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Front wheel bearings have excessive free play |2.3.5b| | 13 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 12 |
| Front Wheel spoke excessively loose |4.2.1b| | 12 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 12 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Drive chain excessively tight |6.2.1d| | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 8 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Nearside Rear Footrest missing |6.2.1a| | 7 |
| Offside Rear Footrest missing |6.2.1a| | 7 |
| Nearside Rear Direction indicator not working |1.5.1c| | 7 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Riders seat insecure |6.2.1a| | 6 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Headlamp insecure |1.2.3b| | 5 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Front Brake lever insecure |3.1.2a| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 5 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 5 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Offside Rear Direction indicator not working |1.5.1c| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Direction indicators not working |1.5.1c| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Fuel hose leaking |7.2.1a| | 3 |
| Rear Drive chain worn to excess |6.2.1e| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 3 |
| Nearside Rear Footrest insecure |6.2.1a| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Fuel tank leaking |7.2.1a| | 3 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Nearside Front Footrest insecure |6.2.1a| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front suspension assembly component excessively bent |2.3.1| | 2 |
| Exhaust mounting missing |7.1.1c| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| All position lamps not working |4.2.1 |a|| | 2 |
| Fuel pipe leaking |7.2.1a| | 2 |
| Rear Brake hose which buldges |3.2.B4| | 2 |
| Brake locking device insecure |3.2.A1e| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Nearside Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Wheel spoke excessively loose |4.2.1b| | 2 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
| Front Headlamp switch insecure |1.2.4| | 2 |
| Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 2 |
| Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 2 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Nearside Front Lower Wheel spoke excessively loose |4.2.1b| | 1 |
| Nearside Rear Lower Built up wheel has a bolt/s missing |4.2.1c| | 1 |
| Nearside Rear Lower Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Lower Front wheel insecure |4.2.3b| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Centre Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Fuel cap ineffective unable to open cap fully. |6.1.3 |b| |i|| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Fork yoke deformed |2.1.1b| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Offside Front Front suspension assembly component missing |2.3.1| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Offside Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front and rear controls |1.3.1a| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied hits switch |3.1.3c| | 1 |
| Rear Rear suspension bush has excessive free play arm |2.4.A2a|i|| | 1 |
| Rear suspension bush has excessive free play lower shocker |2.4.A2a|i|| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Headlamp aim headlamp damaged and function impaired dipping the wrong way |1.2.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. and clutch lever loose. |2.1.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear suspension bush has excessive free play linkage bearings loads of play |2.4.A2a|i|| | 1 |
| Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Inner Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Centre Rear Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Inner Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Direction indicators not working (1.5.1c) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Front suspension assembly component cracked |2.3.1| | 1 |
| Brake hose damaged | 1 |
| Rear Brake disc|s| insecure |3.2.A1g| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Stop lamp affected by the operation of another lamp rear lamp wired back to front |1.3.2| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Stop lamp insecure |1.3.3b| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Rear mono-shock insecure |2.4.B.4| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil bad oil leak |2.3.3| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Fork yoke insecure top yoke nut loose and pinch bolt missing. (2.2.2 (d) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Central Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Central Rear Lower Suspension arm ball joint excessively worn rear shock linkage (5.3.4 (a) (i)) | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Suspension component pin or bush excessively worn All lower bushes appear to have excessive wear in rising rate linkage and lower shock absorber bush |5.3.4 |a| |i|| | 1 |
| Rear Wheel spoke excessively loose Multiple spokes loose |5.2.2 |d|| | 1 |
| Front Wheel spoke excessively loose Multiple spokes loose |5.2.2 |d|| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Centre Upper Direction indicators not working |1.5.1c| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Horn not working |1.7.3a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Indicator switch insecure |1.5.4| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Horn missing |1.7.1| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies Lever |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies Foot pedal |1.3.1a| | 1 |
| Drive chain sprocket worn to excess rear (6.1.7 (c) (i)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel spoke missing spoke snapped (5.2.2 (d)) | 1 |
| Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Throttle operating incorrectly sticking |6.2.7 |a| |i|| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Rear Stop lamp not working on application of rear brake brake (4.3.1 (a) (ii)) | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Headlamp incorrect colour yellow |1.2.1| | 1 |
| Nearside Rear Footrest insecure split pin missing |6.2.1a| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride axle split pin |6.2.1h| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Rear wheel insecure |4.2.3b| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |