Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Horn not working |1.7.3a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate issues | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Rear Wheel spoke excessively loose |4.2.1b| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Nearside Drive chain excessively loose |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Brake hose damaged | 1 |
Drive chain sprocket so loose it is likely to fail tab washer not bent over |6.1.7 |c| |ii|| | 1 |
Clutch lever positioned so it cannot be readily operated lock nut missing |6.2.7 |b|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen bulb fitted wrong (4.1.2 (a)) | 1 |
Rear Suspension arm ball joint excessively worn lower shock mount all 3 link bushes worn (5.3.4 (a) (i)) | 1 |
Rear Wheel excessively corroded corroded and holed (5.2.2 (c) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Central Rear Upper Stop lamp not working does not operate on fb lever |4.3.1 |a| |ii|| | 1 |
Offside Front Lower Brake pedal is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Horn not working |1.7.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel spoke cracked |5.2.2 |d|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Front Handlebar deformed |2.1.1b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Suspension component modified so the suspension is inoperative front forks sticking (5.3.3 (c) (ii)) | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Brake component modification unsafe rear bolt in arm missing (1.1.21 (d) (i)) | 1 |
Front All direction indicators not working front and rear (4.4.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Brake component insecure securing bolt missing on brake operating arm (1.1.21 (c)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride missing |6.2.1h| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link |6.2.1h| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Central Front Upper Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Centre Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel Pulls back to bars (1.1.2 (a)) | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicator not working All |1.5.1c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |